Controls 4
25
4
Controls
4.1
Ignition switch
The ignition switch has three switch posi-
tions:
– OFF (1): All electrical circuits except for
the accessory connection are switched
off. The engine cannot be started. You
can remove the ignition key in this
switch position.
Fig. 12
– RUN (2): The ignition circuit is closed and the engine can be in operation. You
cannot remove the ignition key in this switch position.
– START (3): The ignition circuit is closed and the starter is activated. When releas-
ing the ignition key, it will return to the position RUN. You cannot remove the igni-
tion key in the position START.
4.2
Steering lock
The steering lock is installed on the steering column.
Locking the steering:
1. Turn steering wheel to the left as far as it will go.
2. Insert the key into the steering lock.
3. Turn key anti-clockwise and remove it.
Unlocking the steering:
1. Insert the key into the steering lock.
2. Turn key clockwise and remove it.
NOTE
The accessory connection is supplied by the battery in any switch position.
NOTE
If a drive position is engaged, the brake pedal must be pressed and held to
start.
Summary of Contents for Prowler 700i HDX 2015
