Arctic Cat 650 Twin2004, Service Manual

Page: 38 / 210

3-9
3
KX138A
4. Remove the V-belt cover accounting for the seal.
Note the position of the glue joint (A).
ATV2064
5. Remove the clutch assembly (A); then lift the
drive belt (B) off the driven pulley (C). Note the
direction of the printed information (D) on the belt
or mark the belt for correct installation. See
Section 2 for procedure.
KX245
KX232A
6. Hold the driven pulley with an appropriate holder;
then remove the driven pulley nut and the driven
pulley.
KX246A
Top-Side Components

NOTE: For efficiency, it is preferable to remove
and disassemble only those components which
need to be addressed and to service only those
components. The technician should use discretion
and sound judgment.

NOTE: The engine/transmission does not have
to removed from the frame for this procedure.

AT THIS POINT
To service any one specific component, only
limited disassembly of components may be
necessary. Note the AT THIS POINT information
in each sub-section.