Arcteq AQ-S215, Instruction Manual

Page: 24 / 289

The "Registers"section stores the function's specific fault data. There are twelve (12) registers, and
each of them includes data such as opening and closing times, command types and request failures.
The data included in the register depend on the protection function. You can clear the the operation
register by choosing "Clear registers"
→
"Clear".
Please note that the content of the
Registers section is not available in the HMI. It can only be
accessed via the AQtivate setting tool.
Figure. 4.4 - 14. Events section.
You can mask on and mask off events related to an object's stage in "Event mask". By default all events
are masked off. You can activate the desired events by masking them ("x"). Please remember to save
your maskings by confirming the changes with the check mark icon. If you want to cancel the changes,
select the strike-through circle to do so. Only masked events are recorded to the event history (which
can be accessed in the "Events" view in the user view section).
Control functions
Once a control function has been activated in the Controls
→
Controls enabled submenu, its own
submenu can be opened. In the image series below, the user has activated three control functions. The
user accesses the list of activated control stages through the "Control functions" module, and selects
the control function for further inspection.
Figure. 4.4 - 15. Control functions submenu.
A AQ Q-S215 -S215
Instruction manual
Version: 2.04
23