Arcteq AQ-S215, Instruction Manual

Page: 103 / 289

Event number Event channel Event block name Event code Description
4491 70 RTD2 11 S6 Meas Invalid
4492 70 RTD2 12 S7 Meas Ok
4493 70 RTD2 13 S7 Meas Invalid
4494 70 RTD2 14 S8 Meas Ok
4495 70 RTD2 15 S8 Meas Invalid
4496 70 RTD2 16 S9 Meas Ok
4497 70 RTD2 17 S9 Meas Invalid
4498 70 RTD2 18 S10 Meas Ok
4499 70 RTD2 19 S10 Meas Invalid
4500 70 RTD2 20 S11 Meas Ok
4501 70 RTD2 21 S11 Meas Invalid
4502 70 RTD2 22 S12 Meas Ok
4503 70 RTD2 23 S12 Meas Invalid
4504 70 RTD2 24 S13 Meas Ok
4505 70 RTD2 25 S13 Meas Invalid
4506 70 RTD2 26 S14 Meas Ok
4507 70 RTD2 27 S14 Meas Invalid
4508 70 RTD2 28 S15 Meas Ok
4509 70 RTD2 29 S15 Meas Invalid
4510 70 RTD2 30 S16 Meas Ok
4511 70 RTD2 31 S16 Meas Invalid
5.3.3 Programmable stage (PGx>/<; 99)
The programmable stage is a stage that the user can program to create more advanced applications,
either as an individual stage or together with programmable logic. The relay has ten programmable
stages, and each can be set to follow one to three analog measurements. The programmable stages
have three available pick up terms options: overX, underX and rate-of-change of the selected signal.
Each stage includes a definite time delay to trip after a pick-up has been triggered.
The programmable stage cycle time is 5 ms. The pick-up delay depends on which analog signal is
used as well as its refresh rate (typically under a cycle in a 50 Hz system).
The number of programmable stages to be used is set in the INFO tab. When this function has been
set as "Activated", the number of programmable stages can be set anywhere between one (1) and ten
(10) depending on how many the application needs. In the image below, the number of programmable
stages have been set to two which makes PS1 and PS2 to appear. Inactive stages are hidden until they
are activated.
A AQ Q-S215 -S215
Instruction manual
Version: 2.04
102