Arcteq AQ-S215 Instruction Manual Download

Page: 8 / 289

Changes

- Terminology consistency improved (e.g. binary inputs are now always called digital inputs).

- Tech data modified to be more informative about what type of measurement inputs are used (phase currents/

voltages, residual currents/voltages), what component of that measurement is available (RMS, TRMS, peak-to-

peak) and possible calculated measurement values (powers, impedances, angles etc.).

- Improvements to many drawings and formula images.

- Improved and updated IED user interface display images.

- AQ-S215 Functions included list Added: Indicator objects, programmable control switch, mA output control,

measurement recorder.

- AQ-S215 Functions included list Removed: CBFP and circuit breaker wear.

- Changed disturbance recorder maximum digital channel amount from 32 to 95.

- Added residual current coarse and fine measurement data to disturbance recorder description.

- Updated I01 and I02 rated current range.

- Added inches to Dimensions and installation chapter.

- Added raising frames, wall mounting bracket, combiflex frame to order code.

- Added logical input and logical output function descriptions.

- Additions to Abbreviations chapter.

- Added button test description to Local panel structure chapter.

- Added Fault register view to Basic configuration chapter.

- Added parameter descriptions to General menu IED user interface chapter.

- Added new parameter descriptions to Monitoring menu IED user interface chapter.

- Added note to Configuring user levels and passwords chapter that user level with a password automatically locks

itself after 30 minutes of inactivity.

- Added more "Tripped stage" indications and fault types to Measurement value recorder function.

- Updated: Digital input activation and release threshold setting ranges and added drop-off delay setting.

- Added sample rate to voltage and current measurement tech data.

Revision

2.04

Date

8.6.2021

Changes

- increased the consistency in terminology

- various image upgrades

- visual update to the order codes

1.2 Version 1 revision notes

Table. 1.2 - 2. Version 1 revision notes

Revision

1.00

Date

8.4.2015

Changes -

The first revision for AQ-S215

Revision

1.01

Date

30.5.2015

Changes -

Added PCB and Terminal options to order code table.

Revision

1.02

Q-S215

-S215

Instruction manual

Version: 2.04

Summary of Contents for AQ-S215

































































































































































































































































































Search results

Summary of Contents for AQ-S215

Reviews:

Related manuals for AQ-S215

Brands by name

Popular brands

Arcteq AQ-S215, Instruction Manual

Search results

Summary of Contents for AQ-S215

Reviews:

Related manuals for AQ-S215

Brands by name

Popular brands