© Zennio Avance y Tecnología S.L.
Ed. 2
Page
1
/
2
GetFace IP
Security Relay
ZVP-ACSR
Technical Documentation
FEATURES
Allows enhancing the security between the
electric door lock and the GetFace IP Basic
Unit, preventing system tampering. The relay
can only be activated if the valid opening code
is received from the GetFace IP Basic Unit. The
output can be:
1 relay 30V/1A AC/DC (contacts NO/NC)
1 active output
12VDC/700mA max.
Dimensions: 56x31x24mm.
Weight: 20g.
Conformity with the CE directives.
SAFETY INSTRUCTIONS
Installation should only be performed by qualified professionals according to the
laws and regulations applicable in each country.
Do not connect the mains voltage nor any other external voltage to any point of the
signal wiring; it would represent a risk for the entire system. The facility must have
enough insulation between the mains (or auxiliary) voltage and the signal wiring or
the wires of other accessories, in case of being installed.
Keep the device away from water and do not cover it with clothes, paper or any
other material while in use.
The WEEE logo means that this device contains electronic parts and it must be
properly disposed of by following the instructions at http://zennio.com/weee-
regulation.
Figure 1.
Security
Relay
Figure 2.
Connection diagram
Exit push button
Door lock
GetFace IP Unit
Reset button
