Page 25
Maintenance
•
Maintenance, repair, and cleaning work as well as the elimination of malfunctions should always be
performed when the drive is switched off and the motor is at a standstill! – Remove the ignition key! –
Switch off the implement!
•
Check the nuts and bolts regularly for tight fit and retighten if necessary!
•
When performing maintenance on the lifted implement, always ensure safety through suitable
support elements!
•
When changing work tools with sharp edges, always use suitable tools and gloves!
•
Properly dispose of oils, grease and filters!
•
Always cut the power supply when working on the electrical system!
•
When performing electrical welding work on the tractor and mounted implement, disconnect the
cable on the generator and the battery!
•
Spare parts must at least comply with the technical requirements specified by the implement
manufacturer! This is ensured with original parts!
•
Do not clean the implement with water. It is recommended to clean the implement with compressed
air.
•
Use additional lighting (e.g. flashlight) if necessary for repair or maintenance work!
CAUTION!
Misprints, errors and omissions excepted.
Summary of Contents for UD 100 M1
Page 20: ...Page 20 10 Connection diagram Figure 23...
Page 27: ...Page 27 Notes...
