Page 18
Figure 18: Truck bed mounting
bracket
Figure 19: Calibration button
Figure 20: Fill level sensor
9
Accessories
•
Truck bed mounting bracket
For practical and easy attachment to flatbeds or pick-up trucks.
Scope of delivery:
Truck bed mounting bracket
Item number:
00300-1-001
•
Calibration button
The calibration button is integrated directly in the wiring
harness of the universal metering unit. Therefore, the
calibration test can be performed directly from the
spreader.
Scope of delivery:
Calibration button
Cable length:
1 m
Item number:
00410-2-094
•
Fill level sensor
This sensor can be retrofitted on the UD.
It measures the fill level in the hopper and triggers
an alarm on the control box when the set level is
undercut.
The sensitivity of the sensor can be adjusted for
the respective seed type. It is adjusted using the
small slotted screw at the rear of the sensor.
Connect the sensor cable according to the
connection diagram (point 10).
Scope of delivery:
Fill level sensor incl.
installation material
Item number:
11000-2-060
Summary of Contents for UD 100 M1
Page 20: ...Page 20 10 Connection diagram Figure 23...
Page 27: ...Page 27 Notes...
