Page 10
Figure 7
Figure 6
Deflector (guide plate)
The deflector is required when the spreading
material is flung towards the front onto the vehicle.
It is installed on the left side in the direction of
travel of the spreader. To install the deflector,
remove the M6x16 flange screw and install the
deflector with the supplied star knob screw.
Dismounting the seeding shaft
To dismount the seeding shaft, proceed as follows:
PLEASE NOTE!
When changing the seeding shaft, ensure that the hopper is completely empty.
After installing the seeding shaft, check the implement for smooth running.
1.
Empty the hopper completely.
2.
Loosen the two locking nuts (WAF 10)
marked in Figure 7 and take off the bearing
flange.
Summary of Contents for UD 100 M1
Page 20: ...Page 20 10 Connection diagram Figure 23...
Page 27: ...Page 27 Notes...
