Page 15
Figure 16
Location of the rating plate
The rating plate is located on the steel
frame.
In cases of inquiries or warranty claims,
please always tell us the production
number of your machine.
Cleaning the spreader
The spreader must be cleaned inside and out on a regular basis to ensure long-term proper functioning.
If not cleaned properly, germs can form inside the spreader due to spreading material residues. Salt
residues can form clumps when they come into contact with moisture in the hopper.
To clean the spreader:
1. Empty the spreading material hopper (see Emptying the hopper, Point 5.9).
2. Disconnecting the spreader from the power supply.
3. Remove the seeding shaft (see Dismounting the seeding shaft for this, Point 5.5).
4. Fold back the cover of the spreading material hopper to open it.
5. Clean the inside of the spreader and the spreading material paths with compressed air.
6. Clean the outside of the spreader with a moist cloth.
CAUTION!
Ensure that NO WATER enters the hopper or the implement. The inside of the implement
can only be cleaned with compressed air.
The paint can be damaged by cleaning with excessive pressure.
Repairs and service
In case of failure or damage to the spreader, please contact the manufacturer. The contact data can be
found on the last page of this operating manual.
Summary of Contents for UD 100 M1
Page 20: ...Page 20 10 Connection diagram Figure 23...
Page 27: ...Page 27 Notes...
