•
Measure the pin outside diameter (a)
and if not complying with specifica-
tions, replace the pin.
Pin outside diameter: 22.991 - 23.000 mm
(0.9052 - 0.9055 in) Limit: 22.971 mm (0.9044 in)
•
Measure the pin inside diameter (b)
and replace the pin if not complying
with specifications.
Pin inside diameter: 23.004 - 23.015 mm (0.9057
- 0.9061 in) Limit: 23.045 mm (0.9073 in)
•
Calculate the clearance between pin
and pin hole and, if not complying with
specifications, replace both pin and
piston.
Pin - piston clearance: C = b - a
0.004 - 0.024 mm (0.0002 - 0.0009 in) Limit:
0.074 mm (0.0029 in)
Fitting the piston
CAUTION
WHEN FITTING THE PISTON RINGS, MAKE SURE THAT THEY ARE REFITTED WITH THE MAN-
UFACTURER REFERENCES OR MARKING FACING UPWARDS.
•
Fit the top ring, the intermediate ring,
the oil scraper ring expander, the lower
oil scraper ring element and the upper
oil scraper ring element.
Engine
PEGASO 650 STRADA - TRAIL - FACTORY
ENG - 148
Summary of Contents for PEGASO 650 STRADA
