![background image](http://html.mh-extra.com/html/aprilia/2q000504/2q000504_service-station-manual_2956278089.webp)
side hole and the hole on the crank-
shaft are perfectly aligned.
•
If this is not the case, repeat the timing
operations.
Specific tooling
020851Y
Camshaft timing pin
020852Y
Crankshaft timing pin
•
Check if the clearance between the cam on the shaft and the tappet is correct.
•
If not, repeat the valve clearance adjustment procedure.
Rear cylinder head valves
Check the rear cylinder head valve clearance val-
ues and adjust if necessary to attain the correct
values, following the procedure described below:
•
Remove both cylinder head covers, the
soundproofing covers, the alternator
side cover and the clutch cover.
•
Move cylinder piston 1 (left rear piston)
to the TDC.
•
Start rotating the crankshaft in the di-
rection of rotation of the engine with a
wrench applied to the primary gear fas-
tener nut. As soon as the first fastener
screw of the camshaft gear is visible,
remove the screw.
•
Continue rotating the crankshaft in the
direction of rotation of the engine to
complete one full turn + 90° (450° in
total) relative to the starting position in
the previous step.
•
Insert the pin from the flywheel side in-
to the hole in the crankshaft.
Specific tooling
020852Y
Crankshaft timing pin
Tuono V4 1100 Factory
Maintenance
MAIN - 89
Summary of Contents for 2Q000504
