Pos.
Description
Type
Quantity
Torque
Notes
bending the tabs in
the notches, it can
be turned further by
35° or unscrewed
by max. 10°
7
Upper yoke fixing cap
-
1
100 Nm (73.76 lb ft)
-
8
Screw fastening spacer to the chas-
sis
M8x25
1
20 Nm (14.75 lbf ft)
Loctite 243
9
Screw used to fasten the steering
shock absorber to the upper yoke
M6
1
10 Nm (7.38 lbf ft)
Loctite 243
10
Screw used to fasten the steering
shock absorber to the stand-off
M6
1
10 Nm (7.38 lbf ft)
Loctite 243
Adjusting play
•
Place the vehicle so that the front wheel is off the ground.
•
Carry out a handlebar rotation test, using a dynamometer at the hand grip external end.
•
The handlebar resistance to rotation must be of 450 (+250 / -100 g) (0.88 +0.55 / -0.22 lb)
in both directions.
•
Adjust if clearance is detected.
NOTE
THE STEERING COLUMN RESISTANCE TO ROTATION MUST BE PERFORMED IN THE TWO
OPPOSITE ROTATION DIRECTIONS.
THE STEERING DAMPER MUST BE DISCONNECTED DURING MEASUREMENT.
•
Disconnect the connectors of the elec-
tronic forks (where required).
•
Remove the handlebar by unscrewing
and removing the four screws.
Suspensions
Tuono V4 1100 Factory
SUSP - 452
Summary of Contents for 2Q000504
