Chapter 5: APEC Network Operation
91
to turn “OFF” Auto Speed.
Weight recording is a special feature of APEC machines for efficient use of system resources.
When turn “ON” “Weight rec:” field, the camera that receives event trigger, such as Motion Detection,
or GPI trigger , will record at the frame rate set on “W. RecFPS” field. This function makes cameras
able to record at higher frame rates when something happen and lower frame rate when nothing. This
saves huge storage space, which is an expensive resource of the system. But in any way, the total
number of frame rate can NOT exceed AP-5004 system frame rate. So, if there are too many
concurrent triggers to the cameras, you may not have the exact frame rate you set for weight recording.
5.7.3 GPI Trigger Recording
Click
GPI Trigger Recording
to bring up
Fig. 5-31.
There are max. 8 GPI to be selected.
Each GPI trigger can record different cameras. You can set different record time for each GPI. Please
remember to enable the setting and click “Done” after finishing.
5.7.4 POS Text record
When AP-5004 is connected with POS till machine, you can set it up to record when POS text
received. Recording can be ONLY when specific POS text strings which are defined as “POS Event”
or whenever text received based on your selection at
Fig. 5-32
. Others are the same as
Fig. 5-31.
Fig. 5-31
GPI select
set how many
seconds you want to
record when GPI
triggers
“Yes” to select the cameras
you want to record
click to
bring up
Fig. 5-31
