Chapter 7: AP-5004 Moible DVR 3G / GPS configuration
111
Appendix A: Auto re-connect feature
A.1: Auto re-connect process
Following diagram shows 3G re-connect procedure of AP-5004. This feature will be activated
ONLY if AP-5004 had connected successfully to 3G before the connection broken.
A.2: How to disable auto re-connect feature
When auto-connect feature is activated, and AP-5004 had been connected successfully to 3G, go to
"System Setup ", "3G ", to check its status. If "Connect Status " shows "Reconnecting
Ξ
", as
Fig. 7-15,
then click on "Connect
Ξ
" will disable auto re-connect feature at the next cycle of 3G connection.
Fig. 7-14
