Chapter 1. AP-5004 Overview
3
2. Installation
Please refer to the wiring diagram of Fig. 1-3. Standard delivery of AP-5004 package include
The machine itself , 1*AV cable , 1*IO cable and 1*manual CD. There is no hard disk included
UNLESS customer requests it at the time AP-5004 is ordered. The RED boxes on
Fig. 1-3
are
external devices that need to be installed for AP-5004 configuration. Current standard delivery firmware
version for AP-5004 is MDVR2.X. You can also get this information after running up AP-5004 by
entering “advanced set up ->”system information” from GUI screen.
2.1 Power connection
-
Connect the “+” & “—“ terminals on the power plug to the correct polarity of vehicle battery.
The “ACC” terminal needs to be wired to the “ACC” signal of engine ignition, in order to
activate the AP-5004 power-on/off delay feature. If you don’t want to bother the “ACC”, then
you can connect “ACC” and “+” terminals together to enable power control by the ON/OFF
switch at the back panel. Under this condition, there will be no power-on/off delay..
VGA
monitor
TV
monitor
Fig. 1-3
Power plug
USB Mouse /
Keyboard
AV cable
IO cable
