Chapter 1. AP-5004 Overview
5
2.6.3 Loosen the 4 screws at the two sides of the hard disk tray and lift up the plastic tape to move
tape out the hard disk. Then you can exchange the hard disk or install a new one.
2.7 USB Mouse -
You need a mouse when you want to do the system configuration or back up
record files. There are 4*USB ports on AP-5004. Two at the back panel and the other
two at front. If you don’t use mouse, you can use IR remote controller to operate it.
3. External 3G modem an GPS modem installation
You will need an external 3G modem for communication between AP-5004 and control center.
If you also want to have GPS tracking with e-Map support on SecuTrack CMS, then, you will need
a GPS modem.
Please refer to the documentations “FW MDVR1.x 2.x 3G-GPS configuration-
guide” and “ 3G basic Knowledge” for more information.
4. Note
4.1 Camera power –
The 12V camera power is NOT included in AP-5004. It has to come from
battery of the vehicle. If you need assistance, please consult your local reseller or e-mail
to
4.2 Vehicle camera –
You may need small size or weather proof cameras for the installation.
If you have difficulty in finding them from your local market, please consult
4.3 Video / Audio cable
– Cables connecting video & audio signals from cameras or
microphones to AP-5004 are important to ensure the video / audio quality.
P
lease use proper
quality AV cable to avoid noise generation.
Fig. 1-6
screw
screw
