Chapter 3. Graphic User Interface (GUI)
45
set up the recording time for how long you want the cameras to record after GPI trigger. Remember to
make “Enable” as “Yes” to activate this function and click “OK” to save the configuration.
3.15.4 Text recording
( This function is NOT available on firmware version MDVR 2.0 )
This function is particularly for POS integration. If you don’t have POS machine connect to
AP-5004, you can skip this section.
There are two selections for each camera, “POS event” and “Text”. “POS Event” is defined at
“Alarm” set up section. This refers to some kind of special characters from POS machine. “Text”
means as long as there is character data from POS, don’t care what it is. You can also set how long
time the cameras to record at the “Record Time” field.
3.15.5 Pre-alarm recording
( This function is NOT available on firmware MDVR 2.0)
When alarm happens, the cameras can record ahead of the alarm max. 300 frames. You can set
the number of frames you want each cameras to record , as
Fig. 3-64.
Fig. 3-64
Selectable “POS Event”
or “Text”
set how long time you want the
cameras to record
Fig. 3-63
