Chapter 4: IR Remote Control Operation
53
rate applications..
Auto Gain Control
-enables automatic gain control to adjust the video signal strength.
Mirror Horizontal
flips the video signal from the selected camera along the horizontal axis.
Mirror Vertical
– flips the video signal from the selected camera along the vertical axis.
Max Connection -
limits the maximum number of connections allowed to access the AP-5004 over the
Internet. Set to zero to allow the maximum number of connections.
Max Bandwidth -
sets the maximum bandwidth in bytes/second that can be used by users connecting to
the AP-5004 over the Internet.
Max Conn. Bandwidth -
sets the maximum bandwidth allocated for each connection to the AP-5004 .
This is the maximum bandwidth divided by the maximum connections.
Dimension
- sets 320x240 or 640x480 resolution for each camera.
Water Mark-
Sets water mark on the video image.
Local Display-
enables viewing the selected camera video signal on the local display. If this option is set
to Off, the camera is still optional and its video can be recorded if needed.
PTZ Device-
Chose one PTZ from our support list. If user can’t find out PTZ camera, please contact us.
To change the video parameters:
1. Use
the
Up
and
Down
arrow buttons on the remote control to highlight the option.
2. Use
the
Left
and
Right
arrow buttons to change the value assigned to the setting.
3. Press
the
OK
button to confirm the new settings.
Each camera has its own video screen. To move between the screens for each camera, use the
Prev
Page
and
Next
Page buttons on the remote control.
PTZ Control
Select the type of PTZ cameras used and set each camera that has one connected to Yes. The timeout
value represents the time given to the cameras to respond to a command. Don’t forget to setup PTZ ID.
To set the timeout value for PTZ cameras connected to the AP-5004:
