Chapter 4: IR Remote Control Operation
63
4. Press
the
Right
arrow button for the required action to view the submenu.
5.
After enabling the action, set up the
Start
and
End Hour
,
Minute
, and
Second
to make the feature
active during the specified time interval of the day. The default settings have the feature enabled
throughout the whole day.
6.
If you selected the
option as the desired action, you have to set up the recipient of the E-mail,
the subject and the text matter of the E-mail. You can specify which of the 16 cameras status is in the
E-mail.
4.3.14 ISP
If you are connecting to the Internet using dial-up, enter your ISP details using the
ISP
option from the
System Setup menu. Set up the following options:
Phone No. -
enter the telephone number that is dialed by the dial-up modem.
Name -
enter the user name of your dial-up account.
Pass -
enter the password for your dial-up account.
TCP/IP -
set up automatic or manual TCP/IP. If the AP-5004 is connecting through a DHCP server, an IP
address is assigned to it automatically. If you want to set the IP address of the device manually, select the
Manual
option.
To enter ISP details:
1.
Use the
Up
and
Down
arrow buttons to select a field to change.
2. Press
the
Right
arrow button to confirm.
3. Press
the
Key Pad
button on the remote control to display the on-screen keyboard.
4. Use
the
Arrow
buttons to select letters and numbers from the on-screen keyboard and use the
OK
button to confirm.
5.
When the field is correct, press the
Key Pad
button to turn off the on-screen keyboard
6. Press
the
OK
button to confirm the new field.
4.3.15 Registry
server
The
Registry Server
menu enables you to set up the registry server for your device. If you are using a
dynamic IP address for the AP-5004, you can set up the device to post its IP address to the APEC registry
server. You can then look up your IP from the MAC address or server name.
To enter Registry Server details:
1. Use
the
Up
and
Down
arrow buttons to select a field to change.
