ANYHZ FST-500 Series, Manual, Page: 62 / 151

FST 500 Manual
- Page 62 -
16 Run PLC Program
Parameter value 16 programs Multi-Function Input
Terminal:M1 (Pr.38), M2 (Pr.39), M3 (Pr.40), M4 (Pr.41) or M5 (Pr.42) to
enable the AC drive internal PLC program. Parameter value 17
programs an input terminal to pause the PLC program.
Note: Pr.17 to Pr.23, Pr.78, Pr. 79, Pr.81 to Pr.87 define the PLC
program. Another related function is “30 One-Shot PLC Run”. It can be
set to use a not-latched contact as the run signal.
17
Pause PLC
Program
18
Counter Trigger
Signal
Parameter value 18 programs Multi-Function Input
Terminal:M1 (Pr.38), M2 (Pr.39), M3 (Pr.40), M4 (Pr.41) or M5 (Pr.42) to
increase the AC drive‟s internal counter. When an input is received, the
counter is increased by 1.
Note: The Counter Trigger input can be connected to an external Pulse
Signal Generator when counting a process step or unit of material. See
the diagram below.
Settings Function Description
19 Counter Reset
Parameter value 19 programs Multi-Function Input
Terminal:M1 (Pr.38), M2 (Pr.39), M3 (Pr.40), M4 (Pr.41) or M5 (Pr.42) to
reset the counter.