ANYHZ FST-500 Series, Manual, Page: 32 / 151

FST 500 Manual
- Page 32 -
Chapter 4 Parameters
This FST-500 AC motor drive has 157 parameters for easy setting. In most applications, the user can
finish all parameter settings before start-up without the need for re-adjustment during operation.
4.1 Summary of Parameter Settings
※
The parameter can be set during operation.
Parameter Explanation Settings
Factory
Setting
※
Pr.00
Source of Frequency
Command
00: Master frequency determined by digital
keypad (LC-M02E)
01: Master frequency determined by 0 to
+10 V input on AVI terminal with jumpers
02: Master frequency determined by 4 to
20mA input on ACI terminal with jumpers
03: Master frequency determined by RS-485
Communication port
04: Master frequency determined by
potentiometer on digital keypad
00
※
Pr.01
Source of Operation
command
00: Operation determined by digital keypad
01: Operation determined by external control
terminals, keypad STOP is effective
02: Operation determined by external control
terminals, keypad STOP is ineffective
03: Operation determined by RS-485
communication port, keypad STOP is effective
04: Operation determined by RS-485
communication port, keypad STOP is
ineffective
00
Pr.02 Stop Method
00: Ramp stop
01: Coast Stop
00
Pr.03
Maximum Output
Frequency
50.00 to 400.0 Hz 60.00
Pr.04
Maximum Voltage
Frequency (Base
Frequency)
10.00 to 400.0Hz 60.00
Pr.05
Maximum Output
Voltage (Vmax)
115V/230V: 0.1 to 255.0V 220.0
460V: 0.1 to 510.0V 440.0
575V: 0.1 to 637.0V 575.0
Pr.06 Mid-point Frequency 0.10 to 400.0Hz 1.50
Pr.07 Mid-point Voltage
115V/230V: 0.1 to 255.0V 10.0
460V: 0.1 to 510.0V 20.0
575V: 0.1 to 637.0V 26.1