32
to capture the screen display continuously, the duration time (Time Lapse
Capture Frequency) is 5 to 999 seconds between two captures and the
total capture time (Time Lapse Capture Time) is 5 to 14,400 minutes.
Press the
button to start capturing and press it again to stop
capturing in Repeat mode. It will also stop capturing automatically when
the time is up or there is no free storage.
4.3.9 System Setup-USB Utilities
The USB Utilities screen allows you to re-establish connections to your
storage device, format your external USB storage device and check for free
disk space information.
The “USB Reconnect now” is used when the system does not yet recognize
your USB storage device, even though it is plugged in. This will be apparent
when the “Free Disk Space” line does not display on the screen. Highlight
“USB Reconnect now” and press
on the remote to re-establish
connections to your USB device (the system will reboot).
Note
: “Free Disk Space” checking may take a few moments when the USB
drive is larger than 500 GB – on the some storage device an LED will flicker
while free disk space is being evaluated.
The “Format USB” item can be used to format a USB HDD, a USB Pen drive
or a memory card used with a USB card reader. The AnyHD Recorder
supports the FAT/FAT32 file system format only. (AnyHD Recorder does NOT
support other file systems).
Warning: Formatting will erase all data on the USB storage
device. Please backup the data on the storage
device before formatting.
Important Note
: Since USB versions can vary significantly, it is strongly
recommended that you acquire a recent or newer USB storage device to avoid
compatibility and performance issues.
