10
c)
CVBS
– The CVBS cable is a single cable with a
video connector (usually yellow). You will also
need to attach two audio connectors (for L-R
speakers, usually red and white). The CVBS cable
may come as a single cable with the 3 connectors at
each end. Attach the other ends to your Video
Player.
Note:
If your Video Player gives you a choice of using HDMI, YPbPr and CVBS,
it is better to choose HDMI for ease of installation. Also, HDMI and YPbPr
picture quality are both noticeably better than CVBS.
d)
MIC
– In general, it is a 3.5mm phone jack that could
accept microphone input or audio line in. It could be
connected with the earphone output of MP3 player,
smart phone or PC/NB.
Step 2: Connect the HDTV set to the AnyHD
Recorder
Connect your AnyHD Recorder to the HDTV. The
AnyHD Recorder is capable of using HDMI, YPbPr
or AV(CVBS) cables for output. You can choose
one of the two playback options as shown below for
playback.
HDMI
–The figure to the right shows an HDMI
cable connection to the AnyHD Recorder’s HDMI
BYPASS and HDMI PLAYBACK/CVBS PLAYBACK. Attach the other end to
your HDTV. You can connect your TV to HDMI BYPASS output when you are
connecting the device with a PC/NB or game console simultaneously. For
those applications that could not accept video latency when operation, you
should also use the HDMI BYPASS mode for monitoring and use the
PLAYBACK mode (HDMI, CVBS) for playing the recorded video files.
