1 Safety Instructions
D52IB001EN-G
7
1 Safety Instructions
• Read the documentation before using TTK 600.
• Follow all hints and instructions contained in the
documentation to ensure the correct use and
safe functioning of TTK 600.
• The documentation is a part of the product.
Keep this document for the complete working
life of the product and make sure it is easily
accessible to all people involved with the prod-
uct. If you receive any additions or revisions to
the documentation from Anton Paar GmbH,
these must be treated as part of the documenta-
tion.
1.1 General Safety Instructions
Liability
• This documentation does not claim to address
all safety issues associated with the use of the
instrument and samples. It is your responsibility
to establish health and safety practices and
determine the applicability of regulatory limita-
tions.
• Anton Paar GmbH only warrants the proper
functioning of TTK 600 if no adjustments have
been made to the mechanics, electronics, and
firmware.
• Only use TTK 600 for the purpose described in
the documentation. Anton Paar GmbH is not lia-
ble for damages caused by incorrect use of
TTK 600.
Installation and use
• TTK 600 is
not
an explosion-proof instrument
and therefore must not be operated in areas
with risk of explosion.
• The installation procedure should only be car-
ried out by authorized personnel who are famil-
iar with the installation instructions.
• Do not use any accessories or spare parts other
than those supplied or approved by Anton Paar
GmbH (see chapter 3).
• Make sure all operators are trained to use the
instrument safely and correctly before starting
any applicable operations.
• In case of damage or malfunction, do not con-
tinue operating TTK 600. Do not operate the
instrument under conditions which could result
in damage to goods and/or injuries and loss of
life.
• Check TTK 600 for chemical resistance to the
samples and cleaning agents.
Maintenance and service
• The results delivered by TTK 600 not only
depend on the correct functioning of the instru-
ment, but also on various other factors. We
therefore recommend you have the results
checked (e.g. plausibility tested) by skilled per-
sonnel before consequential actions are taken
based on the results.
• Service and repair procedures may only be car-
ried out by authorized personnel or by Anton
Paar GmbH.
Disposal
• Concerning the disposal of TTK 600, observe
the legal requirements in your country.
Returns
• For repairs send the cleaned TTK 600 to your
Anton Paar representative. Only return the
instrument together with the filled out RMA
(Return Material Authorization) and the form
"Safety Declaration for Instrument Repairs".
Please download the Safety Declaration form
from our website www.anton-paar.com.
• Do not return instruments which are contami-
nated by radioactive materials, infectious agents
or other harmful substances that cause health
hazards.
Precautions for highly inflammable samples
and cleaning agents
• Observe and adhere to your national safety reg-
ulations for handling the measured samples
(e.g. use of safety goggles, gloves, respiratory
protection etc.).
• Only store the minimum required amount of
sample, cleaning agents and other inflammable
materials near the TTK 600.
• Do not spill sample/cleaning agents or leave
their containers uncovered. Immediately remove
spilled sample/cleaning agents.
• Make sure that the setup location is sufficiently
ventilated. The environment of TTK 600 must be
Summary of Contents for TTK 600
Page 2: ......
Page 74: ...Appendix B Sample Chamber Dimensions 74 D52IB001EN G Appendix B Sample Chamber Dimensions ...
Page 75: ...Appendix C Declaration of Conformity D52IB001EN G 75 Appendix C Declaration of Conformity ...
Page 77: ...Appendix D Spare Parts and Accessories D52IB001EN G 77 176383 COOLING MODE SWITCHING VALVE ...
