Panel Layout
Remote lamp
Lights up when the MS2830A is in a remote control state.
Preset key
Resets parameters to their initial settings.
Function keys
Used for selecting or executing function menu displayed
on the right of the screen. The function menu contents
are provided in multiple pages and layers.
Application key
Press to switch between applications.
Shift key
Used to operate any keys with functions described in
blue characters on the panel. First press the Shift key,
then press the target key when the Shift key lamp lights
up green.
Main function keys 2
Used to set or execute main functions of the MS2830A.
Executable functions vary depending on the application
currently selected.
Rotary knob/Cursor keys/Enter key/Cancel key
The rotary knob and cursor keys are used to select
display items or change settings.
Main function keys 1
Used to set or execute main functions of the MS2830A.
Executable functions vary depending on the application
currently selected.
RF Input connector
Inputs an RF signal.
Numeric keypad
Used to enter numbers on parameter setup screens.
USB connector (type A)
Used to connect a USB keyboard or mouse or the USB
memory supplied with the MS2830A.
Power switch
Press to switch between the standby state in which AC
power is supplied and the Power On state in which the
MS2830A is under operation. The Power lamp
lights up orange in the standby state, and lights up green
in the Power On state. Press the power switch for a
reasonably long duration (for about two seconds).
SG Output connector
Outputs an RF signal, when the vector signal generator
option is installed.
HDD lamp
Lights up when the MS2830A internal hard disk is being
accessed.
Mod On/Off key
When the vector signal generator option is installed, RF
signal modulation can be turned on and off by pressing .
When modulation is on, the key lamp lights up green.
SG On/Off key
If the Vector Signal Generator option is installed,
pressing enables (On) or disables (Off) the RF signal
output. The lamp of the RF output control key lights up
orange when the RF signal output is set to On.
Copy key
Press to capture a screen image from the display and
save it to a file.
Recall key
Press to recall a parameter file.
Save key
Press to save a parameter file.
Cal key
Press to display the calibration execution menu.
Local key
Press to return to local operation from remote control
operation through GPIB, Ethernet or USB (B), and
enable panel settings.
4
Product Brochure
l
MS2830A
