Anritsu MS2830A-040, Product Brochure

Page: 22 / 52

Versatile Built-in Functions
Noise Source
Supports noise sources from Noisecom NC346 series. NC346 series models and summary specifications are listed below.
See the NC346 series catalog and datasheet for detailed specifications.
K261 DC Block Return Loss
Recommended DC blocks / Adaptor combinations for MS269xA/MS2830A series signal analyzer
Model Frequency Range RF connector Recommended DC Block
Order Name
Recommended Adapter
Order Name
MS269xA
series
MS2690A 50 Hz to 6 GHz N (F) J1555A J0004
MS2691A 50 Hz to 13.5 GHz N (F) J1555A J1398A
MS2692A 50 Hz to 26.5 GHz N (F) J1554A J1398A
MS2830A
series
MS2830A-040 9 kHz to 3.6 GHz N (F) Not required Not required
MS2830A-041 9 kHz to 6 GHz N (F) Not required Not required
MS2830A-043 9 kHz to 13.5 GHz N (F) Not required Not required
MS2830A-044 9 kHz to 26.5 GHz N (F) J1554A J1398A
MS2830A-045 9 kHz to 43 GHz K (F) K261 Not required
Typical Low Frequency Insertion Loss measured
on K261 over the range of 1 kHz to 1 MHz.
Insertion Loss and Return Loss measured on
K261 over the range of 40 MHz to 40 GHz.
NC346 series summary specifications
Model RF Connector
Frequency
[GHz]
Output ENR
[dB]
VSWR (maximum @ on/off) [GHz]
DC Offset DC Block
0.01 to 5 5 to 18 18 to 26.5 26.5 to 40
NC346A SMA (M) 0.01 to 18.0 5 to 7 1.15:1 1.25:1 — — No Not required
NC346A Precision APC3.5 (M) 0.01 to 18.0 5 to 7 1.15:1 1.25:1 — — No Not required
NC346A Option 1 N (M) 0.01 to 18.0 5 to 7 1.15:1 1.25:1 — — No Not required
NC346A Option 2 APC7 0.01 to 18.0 5 to 7 1.15:1 1.25:1 — — No Not required
NC346A Option 4 N (F) 0.01 to 18.0 5 to 7 1.15:1 1.25:1 — — No Not required
NC346B SMA (M) 0.01 to 18.0 14 to 16 1.15:1 1.25:1 — — No Not required
NC346B Precision APC3.5 (M) 0.01 to 18.0 14 to 16 1.15:1 1.25:1 — — No Not required
NC346B Option 1 N (M) 0.01 to 18.0 14 to 16 1.15:1 1.35:1 — — No Not required
NC346B Option 2 APC7 0.01 to 18.0 14 to 16 1.15:1 1.25:1 — — No Not required
NC346B Option 4 N (F) 0.01 to 18.0 14 to 16 1.15:1 1.35:1 — — No Not required
NC346D SMA (M) 0.01 to 18.0 19 to 25
∗
1
1.50:1 1.50:1 — — No Not required
NC346D Precision APC3.5 (M) 0.01 to 18.0 19 to 25
∗
1
1.50:1 1.50:1 — — No Not required
NC346D Option 1 N (M) 0.01 to 18.0 19 to 25
∗
1
1.50:1 1.75:1 — — No Not required
NC346D Option 2 APC7 0.01 to 18.0 19 to 25
∗
1
1.50:1 1.50:1 — — No Not required
NC346D Option 3 N (F) 0.01 to 18.0 19 to 25
∗
1
1.50:1 1.75:1 — — No Not required
NC346C APC3.5 (M) 0.01 to 26.5 13 to 17 1.15:1 1.25:1 1.35:1 — Yes
∗
3
Required
∗
3
NC346E APC3.5 (M) 0.01 to 26.5 19 to 25
∗
1
1.50:1 1.50:1 1.50:1 — Yes
∗
3
Required
∗
3
NC346Ka K (M)
∗
2
0.10 to 40.0 10 to 17 1.25:1 1.30:1 1.40:1 1.50:1 Yes
∗
3
Required
∗
3
∗
1: Flatness better than ±2 dB
∗
2: Compatible with SMA and APC3.5
∗
3: When using noise sources output by DC, always use in combination with a DC block.
Specifications outlines of recommended DC Blocks and Adapters
Ordering
RF Connector Frequency Range VSWR
Model Name
DC Block
J0805 DC Block, N type (MODEL 7003) N (M)-N (F) 10 kHz to 18 GHz 1.35 (max.)
J1555A DC Block, SMA type (MODEL 7006-1) SMA (M)-SMA (F) 9 kHz to 20 GHz
1.50 (9 kHz to 10 kHz)
1.50 (11 kHz to 20 kHz)
1.30 (20 kHz to 20 GHz)
J1554A DC Block, SMA type (MODEL 7006) SMA (M)-SMA (F) 9 kHz to 26.5 GHz
1.50 (9 kHz to 20 kHz)
1.35 (20 kHz to 20 GHz)
1.70 (20 GHz to 26.5 GHz)
K261 DC Block K (M)-K (F) 10 kHz to 40 GHz See figure (return loss) below
Adapter
J0004 Coaxial Adapter N (M)-SMA (F) DC to 12.4 GHz
≤1.08 (DC to 3 GHz)
≤1.11 (3 GHz to 6 GHz)
≤1.18 (6 GHz to 12.4 GHz)
J1398A N-SMA Adapter N (M)-SMA (F) DC to 26.5 GHz
≤1.05 (DC to 3 GHz)
≤1.07 (3 GHz to 6 GHz)
≤1.2 (6 GHz to 13.5 GHz)
≤1.3 (13.5 GHz to 20 GHz)
≤1.45 (20 GHz to 26.5 GHz)
22
Product Brochure
l
MS2830A