Excellent Expandability Platform (Hardware)
The versatility of the MS2830A series is tailored easily to the application by installing modules in expansion slots.
Basic Function and Performance Upgrades
MS2830A-001/101 Rubidium Reference Oscillator/Retrofit
This option is a 10 MHz reference crystal oscillator with excellent
frequency stability startup characteristics of ±1 × 10
–9
at 7 minutes
after power-on.
Aging Rate: ±1 × 10
–10
/month
Start-up Characteristics: ±1 × 10
–9
(7 minutes after power-on)
MS2830A-002/102 High Stability Reference Oscillator/Retrofit
The 10 MHz reference oscillator improving frequency stability up to
aging rate: ±1 × 10
–8
/day
Aging Rate: ±1 × 10
–8
/day
Start-up Characteristics: ±5 × 10
–8
(5 minutes after power-on)
MS2830A-008/108 Preamplifier/Retrofit
This option increases the sensitivity of the spectrum/signal analyzer
functions and is used for examining low-level signals such as
interference waveforms.
MS2830A-011/111 2ndary HDD/Retrofit
Removal HDD for user data storage
MS2830A-016/116 Precompliance EMI Function/Retrofit
This option adds an EMI measurement detection mode and RBW
to the spectrum analyzer function. Both the detection mode used
for CISPR standards (Quasi-Peak, CISPR-AVG, RMS-AVG) and
RBW (200 Hz (6 dB), 9 kHz (6 dB), 120 kHz (6 dB), 1 MHz (Imp))
as well as conventional settings can be selected.
MS2830A-066 Low Phase Noise Performance
Phase noise performance is increasingly important at carrier offsets
of 1 kHz to 100 kHz.
Spectrum analyzer phase noise performance affects ACLR/MASK
measurements at narrowband communications.
(Channel bandwidth : <100 kHz)
Add Option 066 when required by the specifications.
Frequency Range: 9 kHz to 3.7 GHz
(Frequency band mode:
∗
Normal)
9 kHz to 3.5 GHz
(Frequency band mode:
∗
Spurious)
∗
: Requires MS2830A-041/043 for setting.
Span: 300 Hz to 1 MHz (Spectrum Analyzer)
1 kHz to 31.25 MHz (Signal Analyzer)
MS2830A-066 cannot be retrofitted
MS2830A-066 sometimes cannot be installed depending on options.
Model
Case 1
Case 2
Case 3
MS2830A-020/021
Yes
Yes
No
MS2830A-043
Yes
No
Yes
MS2830A-066
No
Yes
Yes
Signal Analyzer Function and
Performance Upgrade
MS2830A-005/105
Analysis Bandwidth Extension to 31.25 MHz/Retrofit
Extends analysis bandwidth to 31.25 MHz.
∗
: Requires Opt. 006.
MS2830A-006/106 Analysis Bandwidth 10 MHz/Retrofit
This option supports the VSA and digitize functions.
MS2830A-077
Analysis Bandwidth Extension to 62.5 MHz
Extends analysis bandwidth to 62.5 MHz.
∗
: Retrofit not supported.
∗
: Requires MS2830A-005 and MS2830A-006.
MS2830A-078
Analysis Bandwidth Extension to 125 MHz
Extends analysis bandwidth to 125 MHz.
∗
: Retrofit not supported.
∗
: Requires MS2830A-005, MS2830A-006 and MS2830A-077.
Note: An image response is received when setting the bandwidth to more
than 31.25 MHz. This can be used when not inputting a signal
frequency outside the MS2830A analysis bandwidth (125 MHz max.).
The MS2690A/91A/92A Signal Analyzer series is recommended for
other measurement purposes.
Product Brochure
l
MS2830A
27
