Anritsu MS2830A-040, Product Brochure

Page: 46 / 52

Options Configuration Guide
Options Configuration
Refer two table shown below about the hardware / software which each frequency model of MS2830A can implement.
Hardware
Frequency range (MS2830A-040/041/043/044/045) not upgradable.

= Can be installed, No = Cannot be installed, R = Require, U = Upgrade
Opt. Name
Retrofit
Addition to Main frame Combination with "Opt." (Refer to the left line)
040 041 043 044 045 001 002 005 006 009 077 078 008 010 011 016 017 020 021 022 026 027 028 029 066 067 068 088 189
001 Rubidium Reference Oscillator
    
002 High Stability Reference Oscillator
  
No No
005 Analysis Bandwidth Extension to 31.25 MHz
   
No R No
006 Analysis Bandwidth 10 MHz
    
U U U U
009 Bandwidth Extension to 31.25 MHz for Millimeter-wave No No No No

No No R No No No No No No No No No
077 Analysis Bandwidth Extension to 62.5 MHz No
    
∗
5 R
∗
5
078 Analysis Bandwidth Extension to 125 MHz No
    
∗
5 R
∗
5 R
008 Preamplifier
  
∗ 1 ∗ 1 ∗ 1
010 Phase Noise Measurement Function
    
011 2ndary HDD
    
016 Precompliance EMI Function
    
017 Noise Figure Measurement Function
    
U U
020 3.6 GHz Vector Signal Generator
 
∗ 2
No No No No
∗ 2
No No No No
021 6 GHz Vector Signal Generator
 
∗
2 No No No No
∗
2 No No No No
022 Low Power Extension for Vector Signal Generator
  
No No No R No No No No
026 BER Measurement Function
    
027 ARB Memory Upgrade 256 MSa for Vector Signal Generator
  
No No No R No No
∗ 3 ∗ 3
028 AWGN
  
No No No R No No
∗
3
∗
3
029 Analog Function Extension for Vector Signal Generator
∗
4 No
 
No No No No R R R No No No No
066 Low Phase Noise Performance No
 
∗ 2 No No No ∗ 2 No No
067 Microwave Preselector Bypass No No No
 
No No No No No No No No No No
068 Microwave Preamplifier No No No
∗
1
∗
1 No
∗
1 No No No No No No No No No
088 3.6 GHz Analog Signal Generator
∗
4
 
No No No No No No No
∗
3
∗
3 No R No No U
189 Vector Function Extension for Analog Signal Generator Retrofit
 
No No No No No No No ∗ 3 ∗ 3 No R No No R
∗
1: Cannot be installed simultaneously Opt. 008 and Opt. 068/168. When Opt. 168 is added to Signal Analyzer with Opt. 008, only Opt. 168 becomes effective.
∗
2: MS2830A-043 can implement only either Opt. 020/021 or Opt. 066.
∗
3: Opt. 027 and Opt. 028 are not used in analog signal generator (Opt. 088/188).
After vector function (Opt. 189) was added, the vector signal generator function can add Opt. 027 and Opt. 028.
∗
4: Require MX269018A.
∗
5: MS2830A-040/041/043/044 require Opt. 005.
MS2830A-045 requires Opt. 009.
∗
6: An image response is received when setting the bandwidth to more than 31.25 MHz.
This can be used when not inputting a signal frequency outside the MS2830A analysis bandwidth (125 MHz max.).
The MS2690A/91A/92A Signal Analyzer series is recommended for other measurement purposes.
46
Product Brochure
l
MS2830A