Useful for Tx Characteristics Evaluation
The MS2830A is fully loaded with all the functions required for
evaluating Tx characteristics. Tests can be performed simply and in
accordance with standards using functions tailored to measurement
contents.
Measure Function
SPA
∗
1
VSA
∗
2
Channel Power
Occupied Bandwidth
Adjacent Channel Leakage Power
Spectrum Emission Mask
Burst Average Power
Spurious Emission
AM Depth
FM Deviation
Multi-marker & Marker List
Highest 10 Markers
Limit Line
Frequency Counter
2-tone 3rd-order Intermodulation
Distortion
Power Meter
Independent function
∗
3
Phase Noise
Opt. 010
Noise Figure
Opt. 017
∗
4
∗
1: SPA (Spectrum Analyzer)
∗
2: VSA (Vector Signal Analyzer), Requires Opt. 005/006/077/078
∗
3: Use USB Power Sensors
∗
4: Use Noise Sources (Noisecom, NC346 series)
Measurement Results
■ Bandwidth for specified conditions
Measurement Results
■
Absolute power per Hz in channel band
■
Total power in channel band
Measurement Results
■
Absolute power of Offset channel
■
Relative values in relation to reference power selected
in ACP reference
Channel Power
This function measures channel bandwidth power. Three types of
filters (Rect, Nyquist, Root Nyquist) can be selected.
Pre-installed templates for each standard support easy parameter
setting.
SPA
VSA
Adjacent Channel Leakage Power
This function measures carrier adjacent channel (offset) power
(In-Band).
1 to 12 carriers can be set and switched instantaneously on-screen.
True ACLR performance is measured using the noise cancellation
function to subtract main-frame noise from the measurement result.
Pre-installed templates for each standard support easy parameter
setting.
SPA
VSA
Occupied Bandwidth
Occupied bandwidth is measured by selecting either the N% or X-dB
mode.
Pre-installed templates for each standard support easy parameter
setting.
SPA
VSA
Bandwidth
Measurement Results
Bandwidth
Measurement Results
Versatile Built-in Functions
Offset
Offset
In-Band
Measurement Results
Product Brochure
l
MS2830A
17
