■
Signal Analyzer
Display waveform data, such as Spectrum, Power vs. Time captured at specific time
General
Trace mode
Spectrum, Power vs. Time, Frequency vs. Time, Phase vs. Time, CCDF, Spectrogram, No Trace
Analysis bandwidth
Sets capture analysis bandwidth from center frequency
1 kHz to 10 MHz (1-2.5-5 sequence) (with MS2830A-006)
1 kHz to 25 MHz (1-2.5-5 sequence), 31.25 MHz (with MS2830A-005)
1 kHz to 25 MHz (1-2.5-5 sequence), 31.25 MHz, 50 MHz, 62.5 MHz (with MS2830A-077)
1 kHz to 25 MHz (1-2.5-5 sequence), 31.25 MHz, 50 MHz, 62.5 MHz, 100 MHz, 125 MHz (with MS2830A-078)
Sampling rate
Auto setting by conditions of analysis bandwidth
2 kHz to 20 MHz (1-2-5 sequence) (with MS2830A-006)
2 kHz to 50 MHz (1-2-5 sequence) (with MS2830A-005)
2 kHz to 100 MHz (1-2-5 sequence) (with MS2830A-077)
2 kHz to 200 MHz (1-2-5 sequence) (with MS2830A-078)
Capture time
without MS2830A-077/078, or
≤31.25 MHz
bandwidth
Setting capture time length
Minimum capture time length: 2 μs to 50 ms (Determined according to analysis bandwidth)
Maximum capture time length: 2 s to 2000 s (Determined according to analysis bandwidth)
Setting mode: Auto, Manual
with MS2830A-077, >31.25 MHz bandwidth
Setting capture time length
Minimum capture time length: 1 μs
Maximum capture time length: 500 ms
Setting mode: Auto, Manual
with MS2830A-078, >31.25 MHz bandwidth
Setting capture time length
Minimum capture time length: 500 ns to 1 μs (Determined according to analysis bandwidth)
Maximum capture time length: 500 ms
Setting mode: Auto, Manual
Trigger
Free run (Trigger off), Video, Wide IF video, Frame, External (TTL)
SG Marker (with MS2830A-020/021)
ADC resolution
without MS2830A-077/078, or
≤31.25 MHz
bandwidth
16 bits
36
Product Brochure
l
MS2830A
