Anritsu 680XXC, Operation Manual, Page: 68 / 241

Setting a Preset Sweep Range–At the menu, se-
lect the sweep range (
F1-F2 , F3-F4 , F5-dF , or F6-dF )
that you wish to set. The menu then displays the
current frequency parameters for the selected sweep
range. Now, use the menu edit soft-keys to open the
frequency parameters for editing.
Edit the current frequency parameters or enter new
frequency parameter values for the sweep range. To
close the open frequency parameter when you are
finished, press its menu edit soft-key or make an-
other menu selection.
You can set all the preset sweep ranges in this man-
ner.
Selecting a
Power Level While in a sweep frequency mode, you can edit the
current output power level or enter a new output
power level for the frequency sweep.
Editing the Current Power Level
Press
Edit L1 to open the power level parameter,
then edit the current power level using the cursor
control key or rotary data knob. To close the open
power level parameter, press
Edit L1 or make an-
other menu selection.
Entering a New Power Level
Press
Edit L1 to open the power level parameter,
then enter the new power level using the keypad
and appropriate terminator key. To close the open
power level parameter, press
Edit L1 or make an-
other menu selection.
NOTE
You can also select any of the preset
power levels for a frequency sweep or a
power level step for analog and step
sweeps. For instructions, refer to para-
graphs 3-9 (Fixed Power Level Operation)
and 3-10 (Power Level Sweep Operation).
681XXC OM 3-35
LOCAL (FRONT SWEEP FREQUENCY
PANEL) OPERATION OPERATION