Anritsu 680XXC, Operation Manual, Page: 56 / 241

Frequency List–To go to the Frequency List Menu
(below), press
Freqs List . This menu lets you tag,
edit, or output a frequency from the list.
Use the cursor control key to select a frequency from
the frequency list. The selected frequency is high-
lighted in reverse video and displayed in full below
the frequency list.
Press Tag to mark a selected frequency (place an F
in front of it). If the frequency is already tagged,
pressing
Tag will untag it (remove the F ). Tagging
selected frequencies lets you quickly switch between
them using the scan keys of the Tagged Frequencies
menu.
Press Edit to edit the selected frequency or enter a
new frequency.
Press Output Freq to output the selected frequency.
This frequency is output until you select another
frequency from the list and press
Output Freq . On
the frequency list, the output frequency selection is
marked by a black square or, if tagged, an
F high-
lighted in reverse video.
Return to the CW Frequency Control Menu display
by pressing
Previous Menu .
681XXC OM 3-23
LOCAL (FRONT CW FREQUENCY
PANEL) OPERATION OPERATION