Anritsu 680XXC, Operation Manual, Page: 213 / 241

Terminating
Master-Slave
Operation The following describes how to terminate master-
slave operation and return the Slave instrument to
local (front panel) control.
On the Master instrument, select CW mode.
At the CW Menu, press Master Slave to go to the
Master Slave Menu display.
At the Master Slave Menu display, press Enable .
This terminates master-slave operation and returns
the Slave instrument to local (front panel) control.
681XXC OM 7-9
USE WITH MASTER-SLAVE
OTHER INSTRUMENTS OPERATION