Anita Garudan GF-1105 Series, User Manual, Page: 8 / 77

ANITA ©
MP01100EN_161101 8
4) LUBRICATION
4.1 Installing Magnetic Chip Remover
Attach the magnetic chip remover, which is in the accessory box, to the drain plug of th eoil pan
* Do not use the magnet for other purposes. Use of the sewing machine without the magnet may
cause malfunction or even damage of the machine .
4.2 Lubricating the oil pan
a) Make sure you use lubricant recommended
by manufacturer
b) Fill the lubricant up to the „HIGH“ mark .
c) If the oil in use sinks below „LOW“
mark, fill in to „HIGH“ immediately.
5) FUNCTION OF REVERSE FEED STITCHING MECHANISM
When the reverse button is pressed (1), the machine perform reverse feed stitching. The machine
performs reverse feed stitching as long as the switch lever is held pressed.
By pressing the button 2, illumination is switched on at full light. By pressing the button again, the
volume of light dies down. There are 3 levels of light intensity.
Fig. 6
www.garudan.cz