Anita Garudan GF-1105 Series, User Manual, Page: 35 / 77

ANITA ©
13
4) ERROR CODE LIST
Error Code Problem Strategies
E1
Power Module is faulty.
Abnormal over current or voltage.
Resistor is damaged or F1 fuse is blown. System will be shut down until the power resets on.
Please acheck the power board in detail.
E2
1) When power on, detected main voltage too low
2) Connect the wrong voltage, too low Moto and machine will be shutting down. Please
check the AC power. (Too low) Please check the
main pc board.
E3
Operation Box linked to CPU interface had
communication error. Motor and machine will be shutting down. Please
check the operation box.
E5
The connection of the Foot Pedal error Motor and machine will be shutting down. Please
check the connection of the Foot Pedal or the
problem of it.
E7
a) Bad connection at the motor connector.
b) Machine locked or object stuck in the motor
pulley.
c) Sewwing material is too thick.
d) Module output is abnormal. Motor and machine will be shutting down. Please
check the motor connectors, synchronizer situation
and machine situation.
E8
Manual Back-Tacking lasts for 15 sec. Motor and machine will be shutting down until the
power resets on.
E9
Sychronizer signal error. Check the upper and lower positioning signal is
normal; no locator mode automatically, and the
tangent; thread wiper; the positioning and all fixed
stitch sewing style features also ivalid. Motor can
not operate normally. (Please check the positioning
signal abnormalities.)
E12
Power is turned on without the sychronizer signal. Motor still can run, but it automatically starts the
clutch mode. All constant-stitch sewing pattern and
trimmer/wiper function is invalid. Please check the
synchronizer.
E13
Overheat Protection or Power Module Please check the connection between power
module and heat sink.
E14
Encoder signal error. Please check the encoder signal or change the
encoder.
E15
Abnormal over current protection for Power
Module. System will be shut down until the power resets on.
Please acheck the power board in detail.
E17
Trimmer switch error. Please check the trimmer switch whether turn in
the correct position.
www.garudan.cz