Anita Garudan GF-1105 Series, User Manual, Page: 10 / 77

ANITA ©
MP01100EN_161101 10
7) LUBRICATION ADJUSTMENT OF HOOK
7.1 Checking the oil supply level of Hook
a) After running the sewing machine for three minutes, secure the oil flow checking paper as shown
in Fig . 10 and run the machine for about five seconds . T hen check the oil tape marked on the
paper.
Fig.10
b) Check the oil supply level three times.
The appropriate level of oil is when the
oil level neither exceeds the maximum
amount nor falls below the minimum
level. (Insufficient oil would jam the hook,
whereas excessive oil would contaminate
the sewing material with oil)
Fig.11
7.2 Adjustment of the Oil Supply Level
Turn the oil flow adjusting screw (1) in the lower shaft front bushing in a clockwise direction for more oil
flow. Turn it counterclockwise for less oil.
Fig.12
www.garudan.cz