Anita Garudan GF-1105 Series, User Manual, Page: 32 / 77

ANITA ©
10
Parameter Parameter Function Range Default Key Description
P23
Setting Stitches D of End
Back-Tacking
− /+
invalid
P24
Anti-pedaling pedals points;
voltage
0-1000 110 − /+
P25
Stitch Balance for End Back-
Tacking 3
0-200
0-200
131 − /+
0 → 200 Action gradually lag
P26
Stitch Balance for End Back-
Tacking 4
158 − /+
P27
Adding 1 Stitch to C Segment
of End Back-Tacking
0-1 0 − /+
1: Thin materials
0: Thick materials
P28
Mode Selection for Bar-
Tacking
A/M A − /+
Bar-Tacking, reverse solenoid action:
A: One shot to pedal, it will automatic execute
Bar-Tacking. M:
Pedal-controlled and motor can stop
arbitrarily
P29 Tangent after braking force 1-50 20 − /+
P30 Thick material afterburner 0-100 0 − /+
P31 Shear line afterburner 0-100 20 − /+
P32
Stitch Balance for Bar-Tacking
5
0-200
131 − /+
0 → 200 Action gradually lag
P33
Stitch Balance for Bar-Tacking
6
158 − /+
P34
Mode Selection for Constant-
Stitch Sewing
A/M A − /+
A:One shot to pedal, it will automatic execute
Constant-Stitch M:
Pedal-controlled and motor can stop
arbitrarily
P35
Constant-Stitch Sewing
Function Selection
ON/OFF OFF − /+
Reserve; set here invalid
P36
Setting Stitches for Section P1
of Constant-Stitch Sewing
0 − /+
Reserve; set here invalid
P37
Wiper Function Selection or
Thread Clamp Pressure
Setting
0-11 8 − /+
0: No Action 1: Wiper Action
2-11: Thread Clamp action and the pressure
gradually increased
P38
Trimmer Function Selection
ON/OFF ON − /+
ON: Trimmer Valid
OFF: Trimmer Invalid
P39
Presser Foot UP/Down at
intermediate stop
UP/DN DN − /+
UP: Presser foot goes up automatically
DN: Presse foot keeps down (Controlled by
heeling pedal)
P40
Presser Foot UP/Down after
Trimming
UP/DN DN − /+
UP: Presser foot goes up automatically
DN: Presse foot keeps down (Controlled by
heeling pedal)
P41
Display the sewing finished
quantity
0 − /+
Counting the finished-sewing quantity
P42
Information Display
N-01 − /+
NO1 Electrically controlled version serial
numbers
NO2 Selected needle cassette version
NO3 Speed
NO4 Pedals AD
NO5 Positioning angle (0--359)
NO6 Under the positioning angle
NO7 Bus voltage AD
P43
Setting Direction of Motor
Rotation
CCW/WC CCW − /+
CW: Clockwise
CCW: Counter Clockwise
www.garudan.cz