Anita Garudan GF-1105 Series, User Manual, Page: 20 / 77

ANITA ©
MP01100EN_161101 20
24) PEDAL PRESSURE AND PEDAL STROKE
1. Adjusting the pressure required to depress the front part of the pedal .
a) This pressure can be changed by altering mouthing position of pedaling pressure adjust spring (1).
b) The pressure decreases when you hook the spring on the left side.
c) The pressure increases when you hook the spring on the right side.
2. Adjusting the pressure required to depress the back part of the pedal.
a) This pressure can be adjusted by using the regulator screw (2).
b) The pressure increases as you turn the regulator screw in.
c) The pressure decreases as you turn the screw cut. .
3. Adjusting the pedal stroke.
a) The pedal stroke decreases when you insert connecting rod (3) into the hole left.
Fig. 33
25) INSTALLING THE THREAD STAND
1. Assemble the thread stand unit and insert it in the hole in the machine table.
2. Tighten locknut (1) to fix the thread stand.
3. For ceiling wiring pass the power cord through spool rest rod (2).
Fig. 34
www.garudan.cz