Anita Garudan GF-1105 Series, User Manual, Page: 26 / 77

ANITA ©
4
1) SAFETY INSTRUCTIONS
1. Users are required to read the operation manual completely and carefully before installation or
operation.
2. All the instruction marked with sign must be observed or executed; otherwise, bodily
injuries might occur.
3. The product should be installed and pre-operated by well trained persons.
4. For perfect operation and safety, it is prohibited that using extension cable with multi-outlet
for power connection.
5. When connecting power supply cords to power sources, it is necessary to make sure that the
power voltage is lower than 250 VAC and matches the rated voltage indicated on the motor’s name
plate.
※
Attention: If the Control Box is AC 220V system, please don’t connect the Control Box to AC 380V
power outlet. Otherwise, the error will occur and motor will not work. If that happens, please turn
off the power immediately and check the power voltage.
6.Don´t operate in direct sun light, outdoors area and where the room temperature is over 45°C or
below 5°C.
7. Please avoid operating near the heater at dew area or at the humidity below 30% or above 95%.
8. Don´t operate in area with heavy dust, corrosive substance or volatile gas.
9. Avoid power cord being applied by heavy objects or excessive force, or over bend.
10. The earth wire of power cord must be connected to the system ground of the production plant by
proper size of conductions and terminals. This connection should be fixed permanently.
11. All the moving portions must be prevented to be exposed by the parts provided.
12. Turing on the machine in the first time, operate the sewing machine at low speed and check the
correct rotation direction.
13. Turn off the power before the following operation
：
a) Connecting or disconnecting any connectors on the control box or motor.
b) Threading needle.
c) Raising the machine head.
d) Repairing or doing any mechanical adjustment.
e) Machines idling.
14.Repairs and high level maintenance work should only be carried out by electronic technicians with
appropriate training.
14. All the spare parts for repair must be provided or approved by the manufacturer.
15. Don’t use any objects or force to hit or ram the product.
Guarantee Time
Warranty period of this product is 1 year dated from purchasing.
Warranty Detail:
Any trouble found within warranty period under normal operation, it will be repaired free of charge.
However, maintenance cost will be charged in the following cases even if within warranty period:
1. Inappropriate use, including: wrong connecting high voltage, wrong application, disassemble,
repair, modification by incompetent personnel, or operation without the precaution, or operation
out of its specification range, or inserting other objects or liquids into the product.
2. Damage by fire, Earth quake, lighting, wind, flood, salt corrosive, moisture, abnormal power
voltage and any other damage cause by the natural disaster or by the inappropriate environments.
3. Dropping after purchasing or damage in transportation by customer himself or by customer’s
shipping agency .
www.garudan.cz