Anita Garudan GF-1105 Series, User Manual, Page: 31 / 77

ANITA ©
9
3) USER PARAMETER & TECHNICIAN PARAMETER
Parameter Parameter Function Range Default Key Description
In the normal screen, press [P]
P01
Maximum Sewing Speed
(s/m)
100-3700 3700 −/ +
Maximum speed of machine sewing
P02
Speed Curve Adjustment (%)
1-100 80 −/ +
The Lager the value, the faster to increase
sped
P03
Needle UP/DOWN
UP/DN DN − /+
UP: Needle Stops at Up Position DN:
Needle Stops at Down Position
P04
Start Back-Tacking Speed
(r/S)
200-3200 1800 − /+
Start back-Tacking Speed Adjustment
P05
End Back-Tacking Speed
(s/m)
200-3200 1800 − /+
End Back-Tacking Speed Adjustment
P06 Bar-Tacking Speed (s/m) 200-3200 1800 − /+ Repeat Bar-Tacking Speed Adjustment
P07 Soft Start Speed (s/m) 200-1500 400 − /+ Soft Start Speed Adjustment
P08
Stitch Numbers for Soft Start
0-99 2 − /+
Soft Start Stitches Setting (one unit = half
stitch
P09
Automatic Constant-Stitch
Sewing Speed (r/S)
200-4000 3700 − /+
Constant-Stitch sewing speed [034.SMP]is set
at A (or when one shot signal is active
P10
Automatic End Back-Tacking
Sewing (Can invalidate the
stitch correction function)
ON/OFF ON − /+
The Stitch-Correction is valid in sewing stop.
Note: Valid only when the [0.11.RVM] must
set on B
ON: Invalid (Constant-Stitch sewing, it can
automatic continue action as CD function)
OFF: Valic (Can´t continue execute CD
function)
P11
Back-Tacking Mode Selection
J/B J − /+
J: JUKI Mode (it will activate when machine is
stopped or running
B: BROTHER Mode (It will activate only the
machine is running
P12
Start Back-Tacking Mode
Selection
A/M A − /+
A: One shot to pedal, it will automatic
execute Start Back- Tacking
M: Pedal-controlled and motor can stop
arbitrarily
P13
Mode Selection at the end of
Start Back-Tacking
CON/STP CON − /+
CON:At the end of Start Back-Tacking,
machine continues sewing if pedal pressed or
START signal on (standing operation)
STP: At the ened of Start Back-Tacking,
machine stops
P14
Soft Start
ON/OFF ON − /+
ON: Slow start feature is turned on.
OFF: Slow start function off.
P15 Make up pin mode 0-2 0 − /+ 0: Semi-pin 1: a pin
P16
Setting Stitches B of Start
Back-Tacking
− /+
Reserve; set here invalid
P17
Setting Turns of Start Back-
Tacking
− /+
Reserve; set here invalid
P18
Stitch Balance for Start Back-
Tacking 1
0-200
0-200
131 − /+
0 → 200 Action gradually lag
P19
Stitch Balance for Start Back-
Tacking 2
158 − /+
P20
Mode Selection for End Back-
Tacking
A/M A − /+
A:Pedal full heeling, it wil automatic execute
end Back-Tacking
M: Pedal-controlled and motor can stop
arbitrarily
P21
End Back-Tacking Function
Selection
ON/OFF ON − /+
ON: termination feature is turned back seam
OFF: End back seam is off
Quick Setup from the front, where the
setting is ivalid
P22
Setting Stitches C of End
Back-Tacking
− /+
[End Back-Tacking] C,D segment pin count
set Quick Setup from the front,
where
thesettingis
www.garudan.cz