Anita Garudan GF-1105 Series, User Manual, Page: 29 / 77

ANITA ©
7
Name Key Indicate Icons
Presser foot
shortcuts
1. LED ON=Presser Foot automatically goes up after trimming.
2. LED ON= Presser Foot automatically goes up after motor
stops.
3. Two icons are both LED ON= Presser Foot automatically goes up
after trimming and motor stops.
4. Two icons are both LED OFF=Presser Foot is inactive.
Slow play seam
shortcuts
1. The corresponding icon light, slow starting sewing open.
2. The corresponding icon is not lit, no slow-starting sewing
function.
Clamp function
keys
1. The corresponding icon light, thread nipper function is turned on.
2. The corresponding icon is not lit, no thread nipper function.
Maximum
speed setting
key
Speed up key: the speed should not lower than the value set by
technician
Slow down key: the minimum speed is 200r/m
2.2 Comparison Table of LCD Display Fonts and Actual Fonts
Arabic Numerals:
English Alphabet:
2.3 Manually adjust the positioning
Press and hold
the [S] key to
boot into the
needle
position P term
correction
parameters Enter the parameter content, the hand wheel adjustment supreme
needle position (parameter will change with the hand wheel
position), the [S] key to save the parameters (after saving, under
the needle position will be automatically adjusted accordingly), the
key to exit without saving the parameters.
www.garudan.cz