Anita Garudan GF-1105 Series, User Manual, Page: 33 / 77

ANITA ©
11
Parameter Parameter Function Range Default Key Description
For entering service parameter interface contact your sales agent
P44
Brake force
0-31 16 − /+ Efforts to stop the machine when selecting
P45
Back-seam operation duty
cycle (%)
10-90 30 − /+
Back-seam action to periodic power output
P46
Motor stops with a reverse
angle after trimming
ON/OFF OFF − /+
ON: It will automatic as reverse function after
trimming (angle adjustment according to the
parameter [047.TR8]
OFF: No Function
P47
Adjustment of reverse angles
after trimming
50-200 160 − /+
Adjusting at reverse direction after trimming
P48
Low (Positioning) Speed (s/m) 100-500
210 − /+ Setting Positioning Speed
P49
Trimming Speed (s/m)
100-500 250 − /+ Adjusting trimming speed
P50
The time of Foot lifting
10-990 250 − /+ Adjustment of foot lifting action
P51
Duty-Cycle Setting for Foot
Lifter (%)
10-90 30 − /+
Adjustment for Duty-Cycle of Foot
Lifter/Byck- Tacking (Fine tuning can reduce
the over-heating)
P52
The time of Foot down
10-990 120 − /+ Adjustment of foot down action
P53
Cancel Foot Lifting when Half-
Heeling the Pedal
ON/OFF OFF − /+
ON: Pedal half heeling without foot lifting
function.
OFF: Pedal half heeling with foot lifting
function
P54
Trimming Time (ms)
10-990 200 − /+ Trimming sequence time setting
P55
Setting Wiper Timing
10-990 380 − /+ Wiper sequence setting
P56
Needles Goes Up
Automatically as Power
turned on
ON/OFF ON − /+
ON: Power turned on, needle goes up position
automatically
OFF: No Function
P57
Protection time for foot lifter
(S)
1-120 10 − /+
It will automatic come down when foot lifter
keep lift over the setting time
P58
Up Position Adjustment
0-1440 40 − /+
Up Position Adjustment
The needle will advance stop when the value
decreased.
The needle will delay stop when the value
increased.
P59
Down Position Adjustment
0-1440 750 − /+
Down Position Adjustment
The needle will advance stop when the value
decreased The needle will delay stop when
the value increased
P60
Testing Speed (s/m) 100-
3700
2000 − /+
Setting testing speed
P61
Testing A
OFF − /+
Option of Testing A, after setting press
[060.TV] to set the speed keep running
P62
Testing B
OFF − /+
Option of Testing B, after setting press
[060.TV] to set the speed execute the cycle of
Start-Sewing-Stop-Trimming
P63
Testing C
OFF − /+
Option of Testing C, after setting press
[060.TV] to set the speed execute the cycle of
Start-Sewing-Stop without positioning
function
P64
Running Time of Testing B
and C
1-250 20 − /+
Setting running time of testing B and C
P65
Stop Time of Testing B and C
1-250 20 − /+ Setting stop time of testing B and C
P66
Machine Protection Switch
Testing
0-2 1 − /+
0: Disable, 1: Testing zero signal, 2: Testing
positive signal
P67
Trimming Protection Switch
Testing
ON/OFF OFF − /+
OFF: Disable
ON: Enable
www.garudan.cz