Anita Garudan GF-1105 Series, User Manual, Page: 19 / 77

ANITA ©
MP01100EN_161101 19
22) ADJUSTMENT OF PEDAL
1. Installing the connecting rod
Move the pedal (3) to the right or left as indicated by arrows. Speed regulator lever (1) of the motor
and the rod (2) should be perpendicular to the pedal. See fig. 31
2. Installing inclination of the pedal
Inclination of the pedal can be easily adjusted by change of the rod length. Loosen the set screw (4)
and set the required length of the rod. See fig. 31
Fig. 31
23) PEDAL OPERATION
The pedal is operated in following four
steps
1.The machine runs at low sewing speed
when you lightly depress the front part
of the pedal (B).
2.The machine runs at high sewing
speed when you further depress the
front part of the pedal (A).
3.The machine stops (with its needle up
or down) when you reset the pedal to its
original position ©.
4. The machine trims threads when you
fully depress t he back part of the pedal
(D).
Fig. 32
www.garudan.cz