84
160-104694 Rev 01
Version 2.2.0
9.2
Preventive Maintenance and Periodical Verifications
The following Table 9-1 indicates the recommended periodical checks and preventative
maintenance.
Table 9-1: Generator Periodical Checks
Test/Service
Time Interval
Rationale
Annual Service
12 Months
Maintenance calibration
required every 12 months by
an authorized service agent.
9.3 Cleaning
•
To periodically clean the device, use a soft, lint-free cloth, dry or slightly
dampened with water.
Do not pour water or any other liquid
directly on
the device.
Do not use alcohol or solvents or other aggressive products
to clean the device! The use of aggressive detergent products can discolor
or damage the paint.
•
The dirt remaining between the keys of the keyboard can be removed with a
small vacuum cleaner (reduced power).
•
Console’s screen can be cleaned with a soft cloth dampened with water. Do
not use spray or aerosol products on the screen, to avoid the liquid from
penetrating inside the console and damaging the components.
9.4
Replacing Main Fuses
The device has the capability to select the main power for use in the US (115 V) or in
Europe (230 V). The main selector is located inside the
Power Supply Group
and is a
unique part of the fuse-holder in Figure 9-1.
Figure 9-1: Power Supply Group Hosting the Main Selector
Summary of Contents for NanoKnife
