44
160-104694 Rev 01
Version 2.2.0
The
Probes Connection Status
indicates the location and number of probes connected to
the generator. The generator will determine if the probes are valid and are available for a
procedure. The User may select the specific probes to be used for the procedure by
selecting on the probe number. The probe numbers correspond to the ports on the front
panel of the Generator (see Figure 5-15).
Figure 5-15: Probe Selection Screen
NOTE: Diagram shown for example only; four probe array.
There are two Probe types, Activation Probe or Standard Probe, as shown below in Figure
5-16.
Activation (Blue)
Standard
(Green)
Figure 5-16: Probe Types
Summary of Contents for NanoKnife
