AngioDynamics NanoKnife, User Manual, Page: 52 / 91

52
160-104694 Rev 01
Version 2.2.0
Figure 5-29: Autoset Probe Pop-Up Window
Save ablation button is use with “Overlapping Ablations” to save the current ablation
zone so that it can be referenced with other ablation zones as shown in Figure
5-30
Figure 5-30: Save Ablation or Do Not Save Ablation
Clear ablation
button will remove all the save ablation zones.
Procedure Zone Rotation
allows the User to rotate the ablation zone by Selecting
on the blue oval and dragging the oval around the target zone, selecting 0 to 360
degree angles.
Procedure Spreadsheet shows the ablation parameters for the selected array configuration
and allows the User to define the specific ablation parameters. An ablation consists of a
series of sequences of electrical pulses delivered between two probes. Each line of the
Procedure Spreadsheet
represents the settings of a single probe pair. The Generator
automatically sets the default ablation parameter settings that are displayed in the
spreadsheet. The User can change these settings. Procedure
Spreadsheet values may only
be changed when the screen is in edit
mode by Selecting on the Edit button.
Cells can be accessed by selecting on
the cell to change the appropriate
setting. The "Grey" cells are calculated
values and are not editable (when in
non-edit mode, all cells will be grayed
out). Cells can be changed by clicking
or using the touch screen to select a
cell, which will bring up a dialog box. In
the dialog box the user may type to
enter a new value through the
keyboard, use the Up/Down arrows
keys, or select the Up/Down buttons on
the dialog box, Figure 5-31.
Figure 5-31: Procedure Spreadsheet