Angelo Po FX101 G 2, Installation And Operation Manual

Page: 49 / 132

Combination Oven Installation and Operation Manual
49
Section 8
Troubleshooting
KEY TO ALARM TABLE
(Continued
Alarm Fault Remedy Notes
E10
(OHFWULFDOFRPSRQHQW
compartment has
overheated
The oven solves the problem on its own The oven’s functions are
enabled; cooking cycles
can be performed
E11
E13
E14
(OHFWURQLFFLUFXLWERDUG
diagnostics tripped
Call an authorized service agent The oven’s functions are
enabled; cooking cycles
can be performed
E20 Setup error Call an authorized service agent The oven’s functions
are disabled; no cooking
cycles can be performed
E23 The washing cycle has
been interrupted during
WKH¿QDOVDQLWL]DWLRQ
stage
Press the reset button and rinse the cooking
chamber thoroughly by hand.
Operate the oven in convection mode to dry
the cooking chamber.
,IWKHSUREOHPSHUVLVWV
call an authorized service
agent
E26
$XWRPDWLFFOHDQLQJ
system failure
Check that no residues of cleaning products
have been left inside the cooking chamber.
Rinse the cooking chamber by hand.
,IWKHSUREOHPSHUVLVWV
call an authorized service
agent
The oven’s functions
are enabled so cooking
cycles can be performed
E28
9DOYHKDVIDLOHGWRFORVH
open
Press the “Reset” button Call an authorized
service agent