Angelo Po FX101 G 2, Installation And Operation Manual

Page: 22 / 132

22
Combination Oven Installation and Operation Manual
Section 4
Handling and Installation
CONNECTING T + E GAS E ;+ AUST VENT
IMPORTANT _________________________
Make the connection in co P pliance Z ith
all relevant local and legal require P ents
using appropriate and reco PP ended
P aterials.
IMPORTANT _________________________
Maxi P u P exhaust gas te P perature at the
outlet is approxi P ately 750 ƒ F.
CONNECTING TO A
FAN E ; TRACTOR + OOD
Position the appliance underneath hood (C) as
shown in the diagram.
IMPORTANT _________________________
The gas supply valve P ust open
auto P atically Z hen the fan of the
extraction syste P is s Z itched on.
GAS SUPPLY CONVERSION
WARNING Before proceeding Z ith the
conversion shut off gas supply E efore
disconnecting the electrical po Z er.
WARNING
Before perfor P ing any service
that involves electrical connection or
disconnection and/or exposure to electrical
co P ponents al Z ays follo Z the Electrical
LOCKOUT/TAGOUT Procedure. Disconnect
all circuits. Failure to co P ply can cause
property da P age in M ury or death.
Minimum
Ǝ
The manufacturer has tested the appliance with its
RZQ PDLQV JDV LGHQWL¿HG E\ WKH VWLFNHU DSSOLHG WR
the nameplate.
If the type of gas to be connected is different from
WKDWXVHGIRUWHVWLQJSURFHHGDVIROORZV
1. Turn off gas supply valve (A) .
&KDQJHWKHEXUQHUQR]]OHVHHSDJH
3. Remove the testing gas sticker from the data
plate (B) and apply the new one to identify the
gas being used.
4. Start the “Conversion of gas supply ” procedure.
5. Carry out the appliance testing procedure (see
SDJH
IMPORTANT _________________________
Upon co P pleting the operation P ake sure
there are no gas leaks or P alfunctions.
WARNING Do not use an open Á a P e to
test for gas leaks. Use a co PP ercial leak
detector or a soap and Z ater solution.
WARNING The gas supply conversion
P ust E e P ade E y an authorized service agent
in accordance Z ith the P anufacturer’s
speci À cations and all applica E le codes
and require P ents of the authority having
M urisdiction. If the procedures in these
instructions are not follo Z ed exactly a
À re an explosion or production of car E on
P onoxide P ay result causing property
da P age personal in M ury or death. An
authorized service agent is responsi E le
for proper conversion. Installation is not
proper and co P plete until the operation
of the converted appliance is checked as
speci À ed in the P anufacturer’s instructions
supplied Z ith the kit.
C