AND Weighing Indicator AD-4401, Instruction Manual

Page: 69 / 90

67
Accumulation data format Example
Header
-1
8 Digits Including Data, Polarity, and Decimal Point Unit Terminator
Accumulated
weight
T W , + 0 1 2 3 4 5 6 . 7 8 k g CR LF
Header is
"TW"
Overflow
T W , + SP SP SP SP SP SP SP . SP SP k g CR LF
"SP"
value
Weight -
Overflow
T W , - SP SP SP SP SP SP SP . SP SP k g CR LF
"SP"
value,
"-" polarity
Accumulated
count
T N , + 0 1 2 3 4 5 6 7 8 9 SP SP CR LF
Header is
"TN"
Overflow
T N , + SP SP SP SP . SP SP . SP SP SP SP CR LF
"SP"
value
*The decimal point position remains unchanged in case of overflow.
Output-per-Sampling Format Example
Setpoint
data
Weight data, Hexadecimal, 6 digits Terminator
←⎯⎯→ ←⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯→ ←⎯⎯⎯⎯→
Gross/ Net 3 0 0 0 2 7 1 0 CR LF
+ Overflow 0 0 7 F F F F F CR LF
Weight data
[7FFFFF]
- Overflow 0 1 8 0 0 0 0 0 CR LF
Weight data
[800000]
Output Off data 0 0 7 F F F F F CR LF
Same as
+ Overflow
0 0 1 0 1 1 0 0
Comparison result acquired from the weighing
sequence is shown in hexadecimal.
Zero range
Under (Hi-Hi)
Over (Hi)
Full Flow (Go)
Medium Flow (Lo)
Dribble Flow (Lo-Lo)
Discharge gate open
Batch finish
Weighing data
Weighing data is described in 6 digits (HEX) and no decimal point.
(Example)
999.9 kg ---> 00270F (HEX)
-0.1 kg ---> FFFFFF (HEX)
Note) Select 19200 bps when data is output in the Output-per-Sampling Form.